Installing BookAccents

Your software will be delivered to you written to a CD.  All of the program and database files required to begin using BookAccents is contained on this CD.    See  Installation - CD Contents

 

Support Notice:  We are willing to assist you, free of charge, with basic installation telephone support during your installation.  Please understand that specializing your hardware and software may become very complicated.  Under the basic agreement we cannot act as your computer or network consultant, nor can we provide extensive training.  You should seek local assistance or make arrangement for additional levels of support from us.

 


 

The prerequisites for Installation:

  1. The computer on which you will be using BookAccents should have a clean copy of Windows XP Professional completely installed and operational.  

  2. Your LAN (if applicable) must be installed and fully operational.  

  3. You must also have successfully installed you Internet software and connection.  

  4. The 100% compatible receipt printer must be installed, and operational form all computer wishing to print to it.

  5. Any computer nodes that will use BookAccents (except back-office functions) must have a bar-code scanner attached and fully configured Scanner Setup , and a Zebra printer must be accessible either directly or via a LAN connection.  

     

    You only need one Zebra and receipt printer.  These can be shared between more that one computer.  The setup for this, however, is not part of the your basic setup.  You should contract with a local networking consultant, or we will provide help on a time and materials basis.

     


     

     

  6. You must have a configured LAN Adapter in each computer on which you will use BookAccents regardless of whether it is or not attached to a network.

 


 

 

Important Note:  Be aware that the existence of other third party software on your computer may negatively affect the installability and performance of BookAccents.

 

Please peruse the information contained in the following topics:

 

 


Typical Single User Database Installation

Typical Multi-User Database Installation

 

 

In a typical Single User Installation, all of the Database Files are normally placed in the "Program Files/BookAccents directory, and are referenced /assigned using the Setup Program.

 

You are not allowed to configure these files except on your PC's local drive!

 

In a typical Multi-User Installation, the Database Files are spread out across the network at the users whim.  The Database files, highlighted in  Cyan,  are placed on the designated server.   Be sure to have just a single copy of these files referenced by all BookAccents PCs.

 

The Database File,  highlighted in Yellow is normally placed  in Program Files/BookAccents directory of the local computer.  Be careful that each computer has its on copy of this file.

 

 

Remember, it is solely your responsibility to provide backup procedures for your data!!

 

 

 

 

 

 


 

 

 

 

Click for Installing Single User Version

Click for Installing Multi-user Version

 

 


 

 

You may want to copy the two file in the "Utilities" folder of your distribution CD to a hard disk area of your choice.  These files will be vital should you need to rebuild your Database.

 

 


Date and Time Formats:

 

  Control Panel>Regional and Language Options

 

The following setting must follow these examples precisely.