|
|
|
|
|
When you clock the link, above you will be able to access the correct printer driver. Download the driver to a folder of your choice on your local hard drive. |
|
|
|
|
|
To begin the installation of your Zebra Printer, select "Printers and Faxes" from your "Start Menu".
If you have installed printer driver in the past, this information will be "old hat" to you. the last few steps are unique, and must be followed, exactly. |
|
|
|
|
|
This screen is the starting point of the Install Printer Wizard. |
|
|
|
|
|
Be sure that a Zebra Printer is not already installed. If there is one, you must remove it from your system. |
|
|
|
|
|
Select "Add" a printer. For this discussion we are adding a printer for use only by the computer to which it is attached. If you are adding a shared printer, you will need to change the installation routine to reflect that. |
|
|
|
|
|
You should enter the physical port to which the Zebra Printer will be attached. Your best bet is to use a parallel or USB port. |
|
|
|
|
|
you now inform the Wizard as to the type of printer to be installed. You should say "have disk" since you downloaded the printer driver from the Zebra Web Site. |
|
|
|
|
|
Click the Browse button, and find the location to which the Zebra Printer Driver was downloaded. |
|
|
|
|
|
zsd.inf is the name of the driver you wish to install. |
|
|
|
|
|
You point to the folder containing the Zebra Print Driver. |
|
|
|
|
|
Select ZEBRA EPL and Zebra TLP2844 |
|
|
|
|
|
Name your printer as Zebra TLP2844 |
|
|
|
|
|
Unless you are setting up the printer as a Network Shared Device, select do not share. |
|
|
|
|
|
We recommend that you do not print a test page. |
|
|
|
|
|
Your Wizard screen should resemble this after selecting the various parameters. |
|
|
|
